Electrolux EASYALU User Manual download pdf (Page 15)

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a

close fitting sink unit or a pre-existing top, providing the

dimensions of the recess correspond to those shown in the

picture.

Proceed as follows:

- Remove the machine’s worktop by unscrewing the rear

retaining screws, pull from the front and slide out the rear

slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the

adjustable feet. When inserting the machine, ensure that the

water inlet and drain hoses are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of

the door.

When the appliance is correctly levelled, the door will not

catch on the levelling spacers on either side of the cabinet.

If the door does not close correctly, loosen or tighten the

adjustable feet until the machine is perfectly level.

820

570 - 600

600

IN05

1 2 ... 10 11 12 13 14 15 16

No comments

Electrolux EASYALU User Manual Page 15