Electrolux ESF43010 User Manual download pdf (Page 10)

The higher the content of these minerals

and salts, the harder your water is. Water

hardness is measured in equivalent

scales, German degrees (dH°), French

degrees (°TH) and mmol/l (millimol per

litre - international unit for the hardness

of water).

The softener should be adjusted accord-

ing to the hardness of the water in your

area. Your local Water Authority can ad-

vise you on the hardness of the water in

your area.

The water softener must be set in

two ways: manually, using the water

hardness dial and electronically.

Water hardness

Adjusting the water hardness

setting

Use

of

salt

°dH °TH mmol/l manually electronically

51 - 70 91 - 125 9,1 - 12,5 2 level 10 yes

43 - 50 76 - 90 7,6 - 9,0 2 level 9 yes

37 - 42 65 - 75 6,5 - 7,5 2 level 8 yes

29 - 36 51 - 64 5,1 - 6,4 2 level 7 yes

23 - 28 40 - 50 4,0 - 5,0 2 level 6 yes

19 - 22 33 - 39 3,3 - 3,9 2 level 5 yes

15 - 18 26 - 32 2,6 - 3,2 1 level 4 yes

11 - 14 19 - 25 1,9 - 2,5 1 level 3 yes

4 - 10 7 - 18 0,7 - 1,8 1 level 2 yes

< 4 < 7 < 0,7 1 level 1 no

Setting manually

The dishwasher is factory set at po-

sition 2.

1. Open the dishwasher door.

2. Remove the lower basket from the

dishwasher.

3. Turn the water hardness dial to po-

sition 1 or 2 (see chart).

4. Replace the lower basket.

10 electrolux set the water softener

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments