Electrolux ESF489 User Manual download pdf (Page 22)

Adjusting the worktop

You can move the worktop forward or backward by

25 mm in order to align the machine with other

kitchen units.

Simply unscrew the two front retaining screws,

move the top to the required position and then

retighten the screws.

Fitting Under a Counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install

it under a close fitting sink unit or a pre-existing

top, providing the dimensions of the recess

correspond to those shown in the picture.

Proceed as follows:

Remove the machine’s worktop by unscrewing the

two front retaining screws, pull from the front and

slide out the rear slots, lifting the worktop.

Insert the machine after adjusting height and

levelling with the adjustable feet. When inserting

the machine, ensure that the water inlet and drain

hoses are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and

sealing of the door.

When the appliance is correctly levelled, the door

will not catch on the levelling spacers, either side of

the cabinet.

If the door does not close correctly, loosen or

tighten the adjustable feet until the machine is

perfectly level.

PFI27GB

820

570÷600

450

IN04

IN02

1 2 ... 17 18 19 20 21 22 23 24

No comments

Electrolux ESF489 User Manual Page 22