Electrolux ESF489 User Manual download pdf (Page 7)

Filling with salt

If your water is "level 1" it is already soft and

therefore there is no need to use salt.

Salt must be used from "level 2" upward.

Only use salt specifically designed for use

in dishwashers.

All other types of salt not specifically

designed for use in dishwasher, specially

table salt, will damage the water softener.

Only fill with salt just before starting one of the

complete washing programmes (not the Rinse and

Hold programme).This will prevent any grains of

salt or salty water, which may have been spilled,

remaining on the bottom of the machine for any

period of time, which may cause corrosion.

To fill:

1. To fill with salt, unscrew the cap of the salt

container.

2. Pour about 1 litre of water inside the container,

or until it is full (this is necessary only before

filling with salt for the first time).

3. Then using the funnel provided, pour in the salt

until the container is full (approx. 1 kg).

Do not worry if water over flows from the unit

when filling with salt, this is quite normal.

4. Replace the cap making sure that there is no

trace of salt on the screw thread or on the

gasket.

5. Screw on the cap tightly.

The salt container will require topping up

periodically.

You are reminded of this by the “Salt refill indicator

light” on the control panel which comes on when

the salt has finished.

The “Salt refill indicator light” on the

control panel can remain illuminated for

2-6 hours after the salt has been

replenished, assuring the dishwasher

remains switched on. If you are using

salts that take longer to dissolve then this

can take longer. The function of the

machine is not affected.

PFS02GB

SALE

SALT

SALZ

SEL

SR02

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments

Electrolux ESF489 User Manual Page 7

Comments to this Manuals

Related products and manuals for Dishwashers Electrolux ESF489