Electrolux GA6115IFSW User Manual download pdf (Page 12)

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic open.

This can cause damage to

the appliance.

AirDry is automatically activated with all

programmes excluding .

To improve the drying performance refer

to the XtraDry option or activate AirDry.

How to deactivate AirDry

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously Delay and Start

until the indicators ,

, and start to flash

and the display is blank.

2. Press Start.

• The indicators ,

and go off.

• The indicator continues to

flash.

• The display shows the current

setting: = AirDry activated.

3. Press Start to change the setting:

= AirDry deactivated.

4. Press the on/off button to confirm the

setting.

7. OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate or

deactivate options while a

programme is running.

Not all options are compatible

with each other. If you have

selected non compatible

options, the appliance will

automatically deactivate one

or more of them. Only the

indicators of the options still

active will stay on.

7.1 XtraDry

Activate this option when you want to

boost the drying performance. With use of

this option, the duration of some

programmes, water consumption and the

last rinse temperature can be affected.

The XtraDry option is a permanent option

for all programmes other than and

need not to be selected at every cycle.

Every time is activated, XtraDry

option is off and needs to be chosen

manually. In other programmes, the

setting of XtraDry is permanent and it is

automatically used in next cycles. This

configuration can be changed at any time.

Activating XtraDry option deactivates

TimeSaver.

How to activate XtraDry

Press Option until the indicator comes

on.

If the option is not applicable to the

programme, the related indicator does not

appear or it flashes quickly for a few

seconds and then goes off.

The display shows the updated

programme duration.

7.2 TimeSaver

The TimeSaver allows to reduce the time

of the selected programme.

The total programme duration decreases

by approximately 50%.

The washing results are the same as with

the normal programme duration. The

drying results can decrease.

This option increases the pressure and the

temperature of the water. The washing

and the drying phases are shorter.

By default, TimeSaver is off, but it is

possible to activate it manually. This

option cannot be combined with XtraDry

at the same time.

www.electrolux.com12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Comments to this Manuals

No comments