Electrolux TTC1004 User Manual download pdf (Page 15)

approximately 3 seconds and then

shows the programme duration.

• To select the My Favourite

programme, press .

• The indicators of the options

related to the My Favourite

programme are on.

4. Set the applicable options.

5. Close the appliance door to start the

programme.

Starting a programme with

delay start

1. Set a programme.

2. Press repeatedly until the display

shows the desired delay time (from 1

to 24 hours).

The indicator is on.

3. Close the appliance door to start the

countdown.

During the countdown, it is possible to

increase the delay time but not to change

the programme and options.

When the countdown is completed, the

programme starts.

Opening the door while the

appliance operates

Opening the door while a programme is

running stops the appliance. It may affect

the energy consumption and the

programme duration. After closing the

door, the appliance continues from the

point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme ends. It

does not happen if the door

is opened by AirDry function.

Cancelling the delay start while

the countdown operates

When you cancel the delay start you

have to set the programme and options

again.

Press and hold RESET until the

appliance is in programme selection

mode.

Cancelling the programme

Press and hold RESET until the

appliance is in programme selection

mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of the programme

When the programme is complete, the

display shows 0:00. The indicator

is

on.

All buttons are inactive except for the

on/off button.

1. Press the on/off button or wait for the

Auto Off function to automatically

deactivate the appliance.

If you open the door before the

activation of Auto Off, the appliance

is automatically deactivated.

2. Close the water tap.

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.

The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

ENGLISH 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 75 76

Comments to this Manuals

No comments