Electrolux N24 User Manual download pdf (Page 8)

The following parts are included:

1. Mill housing

2. Wedge

3. Mill roller

4. Cover

5. 2 x screws

6. Feeder bowl

7. Wing nut

Assembly rst time

The mill is assembled when delivered. To attach the mill to the Assistent,

loosen the wing nut slightly before tting the mill onto the drive socket.

Check that the mill roller is properly inserted into the socket before

tightening the wing nut. Otherwise the roller will not turn. Place the

Assistent on its side and attach the feeder bowl.

Use - Filling – start

Fill the grinder with the required quantity of cereal (max. 1250 grams).

Start the machine on medium speed. You can then adjust the speed

while it is operating.

What can be crushed into akes?

Only use the mill to crush dry ingredients, such as oats, wheat, rye,

barley, rice, buckwheat and linseed.

Important

Only use pure cereal for making akes. Hard particles such as stones

can damage the mill roller.

If the cereal is not being ground as well as it should be, stop the mill

and look for the cause. Unplug the appliance before you do so. Do not

under any circumstances press with a hard object, such as a knife or

spoon handle.

Dismantling

It is easiest to unscrew the mill with the machine on its side.

First lift off the bowl and then unscrew the wing nut. Hold the mill roller

rmly and pull it out. Remove the wedge.

IMPORTANT!

Cleaning the mill

You do not need to clean the mill every time you have used it. However, it

is a good idea to empty any cereal remains from the mill roller and both

parts of the mill housing.

The accessories should not be immersed in water or rinsed under

running water.

Wipe both parts of the mill housing with a damp cloth. Clean the mill

roller and wedge with a dry brush.

Re-assembling

It is easiest to assemble the Assistent when it is upright.

First attach the mill housing to the drive socket and then continue, as

illustrated.

Important:

When assembling the mill, ensure that there are no grains or other

remains in the mill housing and cover.

Flake Mill

Important! Unplug the appliance before you attach or remove accessories. Never put your hands or any other objects into the mill.

Never leave children alone with the machine when it is being used. Unplug the appliance if you leave it unattended.

in the drive socket.

First lift off the bowl and then unscrew the locking ring. Remove the

various accessories and nally the mill housing.

IMPORTANT!

Cleaning

Do not wash the adjustment mechanism. This should be wiped with a

dry cloth. The mill ring and cone usually only need to be brushed clean.

They can be hand washed and left to dry.

All plastic accessories can be washed in a dishwasher. Place them in the

upper dishwasher rack to prevent them from becoming deformed.

Always clean the mill after grinding aromatic spices or coffee. Otherwise

the taste from these will be passed on to the next food that is ground.

The mill should also be cleaned after grinding seeds from oil plants. It

is not necessary to clean it each time if you have only been grinding

different types of our.

All accessories should be thoroughly dried before re-assembly.

Re-assembling

It is easiest to assemble the Assistent when it is upright.

First attach the mill housing to the drive socket and then continue, as

illustrated.

When assembling the mill, ensure that:

- There is no our left in the square hole in the feeder screw. Otherwise

you cannot make ne adjustments to the milling level.

- The mill ring is in the correct position before attaching the cone to the

hole in the feeder screw.

- The adjustment wheel socket ts into the correct socket in the mill

housing.

Grain mill

Important! Unplug the appliance before you attach or remove accessories. Never put any any objects into the mill.

The following parts are included:

1. Mill housing

2. Feeder screw

3. Mill ring

4. Mill cone

5. Socket for adjusting milling level

6. Lock ring

7. Grinder bowl

8. Wing nut

Assembly for the rst time

Check that the feeder screw is properly inserted in the socket before

tightening the wing nut, otherwise the feeder screw will not turn. Place

the Assistent on its side and attach the grinder bowl.

Use

Filling – setting – start

Fill the grinder with the required quantity of cereal (max. 1250 grams).

Set the grinding level: Right for coarse and left for ne grinding. Start

the machine at medium speed. You can then adjust the grinding level

and speed as required.

What can be ground?

Only use the mill to grind dry ingredients. such as wheat, rye, barley,

buckwheat, millet, rice (coarse and ne), oats, ower seeds, spices,

dried herbs, linseed, poppy seeds, dried mushrooms, sesame seeds,

soybeans and coffee.

Corn (NB. not popcorn) may also be ground (for which we recommend

two grinding stages, rst coarse, then ne).

Dismantling

Unscrew the mill with the machine on its side, to avoid getting our etc.

Otherwise the drum will not rotate. Then tighten up the wing nut again

and turn the appliance on its side.

Use

The drum you select should be suitable for the vegetables you want to

slice or shred.

Here are some suggestions:

Medium shredding drum: root vegetables and green vegetables for

consumption raw, almonds and nuts for baking. Fruit and cheese.

Slicing drum: potatoes, unions, root vegetables, fruit and green

vegetables.

Coarse shredding drum: Root vegetables, green vegetables, and

fruit for soups and pies. Almonds, nuts and bar chocolate for toppings.

Cheese and cheese rinds.

Other accessories: Three additional drums, available. These can be

bought separately:

8. Fine shredding drum - For cheese (hard), nuts, chocolate, stale

bread.

9. Stripping drum - For celery, carrots.

10. Potato shredding drum - For potato pancakes.

Cleaning

All accessories can be washed in a dishwasher.

Place them in the upper dishwasher rack to prevent them from becoming

deformed during drying.

Eng. / Am.

1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments

Electrolux N24 User Manual Page 8

Comments to this Manuals

Related products and manuals for Food processors Electrolux N24