Electrolux ERD28304W8 User Manual download pdf (Page 27)

9. Fit the doors into the pins and install the

doors. Install the hinge.

3

2

1

10. On the opposite site, install the hole cov-

ers provided within the accessory bag.

11. Tighten the hinge. Make sure that the

doors are aligned.

12.

Remove and install the handle

10)

on the

opposite side.

13. Reposition, level the appliance, wait for

at least four hours and then connect it to

the power socket.

Do a final check to make sure that:

• All screws are tightened.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Win-

ter), the gasket may not fit perfectly to the

cabinet. In that case, wait for the natural fit-

ting of the gasket.

In case you do not want to carry out the

above mentioned operations, contact the

nearest After Sales Service Force. The After

Sales Service specialist will carry out the re-

versibility of the doors at your cost.

Electrical connection

Before plugging in, ensure that the voltage

and frequency shown on the rating plate cor-

respond to your domestic power supply.

The appliance must be earthed. The power

supply cable plug is provided with a contact

for this purpose. If the domestic power sup-

ply socket is not earthed, connect the appli-

ance to a separate earth in compliance with

current regulations, consulting a qualified

electrician.

10) If foreseen

electrolux 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 95 96

Comments to this Manuals

No comments