Electrolux ENN28600 User Manual download pdf (Page 10)

Problem Possible cause Solution

Plug is not connected to the

mains socket properly

Connect the mains plug properly

Power does not reach the appli-

ance

Try connecting another electrical

device to the power outlet

There is no voltage in the mains

socket (try to connect another

appliance into it)

Call an electrician

Replacing the bulb

If you want to replace the bulb, do these

steps:

1. Break the circuit of the appliance.

2. Press on the rear hook and at the same

time slide the cover in the direction of the

arrow.

3. Replace the bulb with one of the same

power (the maximum power is shown on

the light bulb cover)

4. Replace the light cover by sliding it into its

original position.

5. Reconnect the appliance.

6. Open the door and check if the light

comes on.

Technical data

Dimension of the recess

Height 1780 mm

Width 560 mm

Depth 550 mm

Rising Time 13 h

The technical information are situated in the

rating plate on the internal left side of the ap-

pliance and in the energy label.

Installation

Read the "Safety Information" carefully

for your safety and correct operation of

the appliance before installing the

appliance.

Positioning

Install this appliance at a location where the

ambient temperature corresponds to the cli-

mate class indicated on the rating plate of the

appliance:

Climate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

10 electrolux

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments