Electrolux ER9098BSAN User Manual download pdf (Page 14)

Electrolux 818 19 23-01/5

Door Reversal

1. Close the cabinet and remove the plug from the

electrical socket.

2. Unscrew the handle. Firstly unscrew the handle at-

tachment from the upper handle holder. Then loosen

both handle holders from the door.

3. Remove the ventilation grille. There is a part on

the grille that can be removed. Reposition it and put

it on the other side.

4. Put the cabinet on a wooden board when it is laid

down. Later, when raising the cabinet, it will be

easier to grip under the cabinet thanks to the board.

5. Unscrew the lower hinge and remove the lower

door. Unscrew the upper hinge pin and remove the

upper door.

6. On the centre beam:

Remove the plastic plugs by driving a drift into them

and rocking them loose.

Move the centre hinge unit to the other side. Fl atten

the threads in the holes remaining from the hinges

and insert new plastic plugs.

7. Unscrew the cover washer on top of the cabinet

and move it to the other side. Replace the upper door

and secure the upper hinge pin.

Replace the lower door. Change the position of the

hinge pin of the lower hinge. Then secure the hinge.

8. Fasten the handle. Follow the instructions in section

”Installation --mounting of handle”

9. Raise the cabinet and replace the ventilation grille.

10. Put the cabinet in position. Check that it stands

straight. See the section "Positioning the cabinet".

1 2 ... 9 10 11 12 13 14 15 16

No comments

Electrolux ER9098BSAN User Manual Page 14