Electrolux TC15213 User Manual download pdf (Page 17)

2

1

• Unscrew the top door hinge pin of the

appliance then screw it back on the oth-

er side.

• Remove the lower hinge. Put over the

pin in the direction of the arrow.

• Fit the appliance door on the upper door

hinge pin.

• Unscrew and install the screw on the op-

posite side.

• Install the lower hinge on the opposite

side leaving the position of the door un-

changed.

• Screw in the one screw in the place set

free on the other side as well as the right

foot.

1

2

3

4

• Remove and install the handle (if fore-

seen) on the opposite side.

• Reposition, level the appliance, wait for

at least four hours and then connect it to

the power socket.

Do a final check to make sure that:

• All screws are tightened.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in

Winter), the gasket may not fit perfectly to

the cabinet. In that case, wait for the natu-

ral fitting of the gasket.

In case you do not want to carry out the

above mentioned operations, contact the

nearest After Sales Service Force. The After

Sales Service specialist will carry out the re-

versibility of the doors at your cost.

PLUG SOCKET

CAUTION!

Make sure that the mains cable

can move freely.

The plug socket necessary for connection

of your appliance to the electricity supply

should be positioned so that it is possible

to pull out the appliance plug.

If your appliance is installed under a contin-

uous worktop, the plug socket should be

provided as shown.

ENGLISH 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments