Electrolux EGM636K User Manual download pdf (Page 7)

The appliance is designed to be connected to 230 V

monophase electricity supply.

The connection must be carried out in compliance with

the laws and regulations in force.

Before the appliance is connected:

1) check that the main fuse and the domestic installation

can support the load (see the rating label);

2) check that the power supply is properly earthed in

compliance with the current rules;

3) check the socket or the double pole switch used for

the electrical connection can be easily reached with

the appliance built in the forniture unit.

The appliance is supplied with a connection cable. This

has to be provided with a proper plug, able to support the

load marked on the identification plate. To connect the

plug to the cable, follow the recommendation given in Fig.

5. The plug has to be fitted in a proper socket.

If connecting the appliance directly to the electric system,

it is necessary that you install a double pole switch

between the appliance and the electricity supply, with a

minimum gap of 3 mm. between the switch contacts and

of a type suitable for the required load in compliance with

the current rules.

The connection cable has to be placed in order that, in

each part, it cannot reach a temperature higher than 90

°C.

The brown coloured phase cable (fitted in the terminal

block contact marked with "L") must always be connected

to the network phase.

Replacement of the voltage cable

Only cable type H05V2V2-F T90 must be used. The

cable section must be suitable to the voltage and the

working temperature.

The yellow/green earth wire must be approximately 2

cm. longer than the phase wires (Fig. 6).

Under no circumstances should you attempt to

repair the appliance or replace the supply cable

yourself. Repairs or replacement of the supply

cable carried out by unexperienced persons may

cause injury or serious malfunctioning. Refer to

your local Service Centre. Always insist on genu-

ine spare parts.

Fig. 6

FO 0073

Neutral

Earth (yellow/green)

Electrical Connection

Fig. 5

TUBO RIGIDO IN RAME

O FLESSIBILE IN

ACCIAIO INOX

FASCETTE

VISTA DAL RETRO

{

Aperture

di servizio

ricavate

nel mobile

VISTA DAL RETRO

FO 0238

YES

RIGID COPPER PIPE OR

FLEXIBLE PIPE IN STAINLESS

STEEL

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Electrolux EGM636K User Manual Page 7

Comments to this Manuals

Related products and manuals for Hobs Electrolux EGM636K