Electrolux EHD72100X User Manual

Ceramic Glass Induction HobInstallation and OperatingInstructions EHD 72100-X374 461 703-A-100406-01g

10Operating the appliance3 Use the induction cooking zones with suitable cookware.Switching the appliance on and off3 After switching on, within appro

11Using the automatic warm-up functionAll cooking zones are equipped with an automatic warm-up function. The automatic warm-up function sets the cooki

12Switching the power function on and offThe power function makes more power available to the induction cook-ing zones, e.g. to bring a large quanti

13Using the child safety deviceThe child safety device prevents unintentional use of the appliance.3 The child safety device can only be switched on a

14Using the timerAll cooking zones can use each use one of the two timer functions at the same time. 3 If a heat setting is set on this cooking zone i

15Setting the time3 If other Timer functions are set, after a few seconds the shortest remaining time for the right-hand or left-hand timer is display

16Changing the timeDisplaying the time remaining for a cooking zone Switching off the acoustic signal Step Control panel Indicator1. Select cooking

17Safety cut-outCooking surface• If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, th

18Tips on Cooking and Frying3 Information on acrylamidesAccording to the latest scientific knowledge, intensive browning of food, es-pecially in produ

19Pan sizeInduction cooking zones adapt automatically to the size of the bottom of the cookware up to a certain limit. However the magnetic part of th

2Dear customer,Please read these operating instructions carefully.Pay particular attention to the section “Safety information” on the first few pages.

20Examples of cooking applicationsThe information given in the following table is for guidance only. The power function is suitable for heating large

21Cleaning and Care1 Take care! Risk of burns from residual heat. 1 Warning! Sharp objects and abrasive cleaning materials will damage the appliance.

22What to do if …Problem Possible cause RemedyThe cooking zones will not switch on or are not function-ingMore than 10 seconds have passed since the a

23If you are unable to remedy the problem by following the above sug-gestions, please contact your dealer or the Customer Care Depart-ment.1 Warning!

24Disposal2 Packaging materialThe packaging materials are environmentally friendly and can be recycled. The plastic components are identified by marki

25Installation InstructionsSafety instructionsThe laws, ordinances, directives and standards in force in the country of use are to be followed (safety

26A device must be provided in the electrical installation which allows the ap-pliance to be disconnected from the mains at all poles with a contact o

27Assembly

28

29

3Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Safety instructions . . . . . . . . . .

30Rating Plate 941 177 622230 V7,4 kW55GDD86AGEHD72100X50 HzELECTROLUXInduction 7,4 kW

31ServiceIn the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions

The Electrolux Group. The world´s No.1 choice.The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and out

4Operating Instructions1 Safety instructions3 Please comply with these instructions. If you do not, any damage resulting is not covered by the warrant

5Safety during use• Overheated fats and oils can ignite quickly. When cooking with fat or oil (e.g. chips) do not leave the appliance unattended.• The

6Description of the ApplianceCooking surface layout Induction cooking zone 1850 Wwith power function 2500 WInduction cooking zone 1400 Wwith power fun

7Control panel layoutLeft-hand sideRight-hand sideChild lock pilot lightHeat setting indicatorWarm up pilot light Timer indicator Heat setting indicat

8Touch Control sensor fieldsThe appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confir

9Residual heat indicator1 Warning! Risk of burns from residual heat. After being switched off, the cooking zones need some time to cool down. Look at