Electrolux EHG 7763 User Manual download pdf (Page 6)

Something Not Working?

If the hob is not working correctly, please carry out the following checks before contacting your local Electrolux Service

Force Centre.

SYMPTOM

 There is no spark when lighting the gas

 The gas ring burns unevenly

SOLUTION

 Check that the unit is plugged in and the electrical

supply is switched on

 Check that the RCCB has not tripped (if fitted)

 Check the mains fuse has not blown

 Check the burner cap and crown have been

replaced correctly, e.g. after cleaning.

 Check the main jet is not blocked and the burner

crown is clear of food particles.

 Check the burner cap and crown have been

replaced correctly, e.g. after cleaning.

If after all these checks, your hob still does not operate

correctly, contact your local Electrolux Service Force

Centre.

Please note that it will be necessary to provide proof of

purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the

above checks have been made as the engineer will

make a charge if the fault is not a mechanical or

electrical breakdown.

Cast Iron Pan Supports

The hob has cast iron pan supports.

Take care when removing them. They are very heavy and

could damage the hob or your kitchen furniture if you let

them fall down.

To keep the pan supports in the correct position, they

are hooked into hinges at the back of the hob. When

removing the pan supports, lift them up as shown in the

diagram. Never turn the pan supports on the hinges, this

could damage them.

Wash the pan supports using hot soapy water. If

necessary, a paste cleaner or a soap impregnated steel

wool pad can be used with caution.

After cleaning, be sure to wipe dry with a soft cloth.

YES

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Electrolux EHG 7763 User Manual Page 6