Electrolux EOC5651CAX User Manual download pdf (Page 30)

• If you have nonstick accessories, do

not clean them using aggressive

agents, sharp-edged objects or a

dishwasher. It can cause damage to

the nonstick coating.

10.2 Removing the shelf

supports

To clean the oven, remove the shelf

supports.

1. Pull the front of the shelf support away

from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove it.

1

2

Install the shelf supports in the opposite

sequence.

The retaining pins on the

telescopic runners must point

to the front.

10.3 Pyrolysis

CAUTION!

Remove all accessories and

removable shelf supports.

Do not start the Pyrolysis if

you did not fully close the

oven door. In some models,

the display shows "C3" when

this error occurs.

WARNING!

The appliance becomes very

hot. There is a risk of burns.

CAUTION!

If there are other appliances

installed in the same cabinet,

do not use them at the same

time as the Pyrolysis function.

It can cause damage to the

appliance.

1. Remove the worst dirt manually.

2. Clean the inner side of the door with

hot water, so that the residues do not

burn from the hot air.

3. Set the Pyrolysis function. Refer to

"Oven functions".

4. When flashes, press or to

set the necessary procedure:

Option Description

P1 If the oven is

not very dirty.

Time of the

procedure: 1

h 30 min.

P2 If you cannot

easily remove

the dirt. Time

of the proce-

dure: 2 h 30

min.

You can use the End function to delay

the start of the cleaning procedure.

During the Pyrolysis the oven lamp is

off.

5. To change the default length of the

procedure (P1 or P2), press to set

, and then press or to set

the length of the cleaning procedure.

6. When the oven is at its set

temperature, the door locks. The

display shows the symbol and the

www.electrolux.com30

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments