Electrolux EOC5741AOX User Manual download pdf (Page 15)

The display shows the cooking time,

and .

5.

Touch or the settings save auto-

matically after five seconds.

6.

When the set time ends, an acoustic

signal sounds for two minutes.

flashes. The appliance deactivates.

7.

Touch a sensor field or open the door

to stop the acoustic signal.

9. USING THE ACCESSORIES

WARNING!

Refer to the Safety chapters.

9.1 Core temperature sensor

The core temperature sensor measures

the core temperature of the meat. When

the meat is at the set temperature, the

appliance deactivates.

There are two temperatures to set:

• The oven temperature: refer to the table

for roasting in the recipe book.

• The core temperature: refer to the table

for the core temperature sensor in the

recipe book.

Only use the core temperature

sensor supplied or the correct re-

placement parts.

1.

Activate the appliance.

2.

Put the tip of the core temperature

sensor (with

on the handle) into

the centre of the meat.

3.

Put the plug of the core temperature

sensor into the socket at the front of

the appliance. The display shows

and the default set core temperature.

The temperature is 60 °C for the first

operation, and the last set value for

each subsequent operation.

4.

Touch or to set the core tem-

perature.

5.

Touch or the settings save auto-

matically after 5 seconds.

Useful information:

You can set the core temperature on-

ly when

flashes. If is in the

display but does not flash before you

set the core temperature, touch

and or to set a new value.

6.

Set the oven function and, if necessa-

ry, the oven temperature.

The display shows the current core

temperature and the temperature bar,

which shows the relation between the

set oven temperature and the current

oven temperature.

Useful information:

The core temperature sensor must

stay in the meat and in the socket

during the cooking.

While the appliance calculates the ap-

proximate duration time, the value of

the Count Up Timer function shows in

the Timer / residual heat display.

When the first calculation ends, the

Timer / residual heat display shows -

and then the approximate duration of

the cooking. The appliance continues

to calculate the duration during the

cooking. The display updates at inter-

vals with the new duration value.

7.

When the meat is at the set core tem-

perature, the core temperature and

flash. An acoustic signal sounds

for two minutes. Touch a sensor field

to deactivate the acoustic signal.

8.

Remove the core temperature sensor

from the socket and remove the meat

from the appliance.

ENGLISH 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Comments to this Manuals

No comments