Electrolux EOC65101X User Manual Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
32 electrolux
What to do if
If you are unable to remedy the problem
by following the above suggestions,
please contact your local Service Force
Centre.
1 Warning! Repairs to the appliance are
only to be carried out by qualified serv-
ice engineers. Considerable danger to
the user may result from improper re-
pairs.
3 If the appliance has been operated in-
correctly, the engineer's visit will be
chargeable, even during the warranty
period.
3 Advice on cookers with metal
fronts:
Because of the cold surface at the front
of the cooker, opening the oven door
during (or just after) baking or roasting
may cause the glass to steam up.
Problem
Possible cause Remedy
The oven does not heat up The oven has not been switched
on
Switch on the oven
The clock has not been set to the
current time
Set the clock to the current time
The required settings have not
been set
Check the settings
The oven’s automatic cut-out has
been triggered.
See Automatic cut-out
The house wiring fuse (in the fuse
box) has tripped
Check fuse If the fuses trip several
times, please call a qualified elec-
trician
The oven lighting is not operating The oven light bulb is faulty Replace oven bulb
The pyrolysis function is not work-
ing (“C1“ is shown in the time dis-
play)
Side rails/oven shelf runners have
not been removed
Remove side rails/oven shelf
runners
F2 appears in the clock display Door not properly closed or door
lock defective
Close door properly;
Turn the appliance off and on
again via the house fuse or the
safety switch in the fuse box;
If displayed again, please contact
the Customer Care Department
An error code not listed above ap-
pears in the time display
Electronic error Switch the appliance off and on
again by way of the house wiring
fuse or the circuit breaker in the
fuse box.
If the display appears again,
please contact customer service
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments