Electrolux GHGL4045WE User Manual download pdf (Page 17)

You can remove the pan supports to easily

clean the hob. After cleaning the hob, make

sure the pan supports are correctly posi-

tioned. Pay attention when you replace the

pan supports to prevent the glass hob top

from scratching. When you wash the pan

supports by hand, take care when you dry

them as the enamelling process occasional-

ly leaves rough edges. If necessary, remove

stubborn stains using a paste cleaner.

After cleaning, dry the appliance with a soft

cloth.

Scratches or dark stains on the glass

ceramic have no effect on how the ap-

pliance operates.

Removing the dirt:

1. – Remove immediately: melting plas-

tic, plastic foil, and food containing

sugar. Use a special glass ceramic

scraper. Put the scraper on the glass

ceramic surface at an acute angle

and slide the blade on the surface.

–

Stop the appliance and let it cool

down before you clean: limescale

rings, water rings, fat stains, shiny

metallic discolorations. Use a special

cleaner for glass ceramic or stainless

steel.

2. Clean the appliance with a damp cloth

and some detergent. The pan supports

are not dishwasher proof; they must

be washed by hand. After cleaning,

make sure that the pan supports are

correctly positioned.

3. At the end rub the appliance dry

with a clean cloth.

PERIODIC MAINTENANCE

Periodically speak your local Service Force

Centre to check the conditions of the gas

supply pipe and the pressure adjuster, if fit-

ted.

OVEN - CARE AND CLEANING

• Clean the front of the appliance with a

soft cloth with warm water and cleaning

agent.

• To clean metal surfaces use a usual

cleaning agent

• Clean the oven interior after each use.

Thus you can remove dirt more easily

and it does not burn on.

• Clean stubborn dirt with a special oven

cleaner.

• Clean all oven accessories (with a soft

cloth with warm water and cleaning

agent) after each use and let them dry.

• If you have nonstick accessories, do not

clean them using an aggressive agents,

sharp edged objects or dishwasher. It

can destroy nonstick coating!

CATALYTIC WALLS AND ROOF

The walls and the roof with a catalytic coat-

ing are self-cleaning. They absorb fat which

collects on walls while the oven operates.

To support this self-cleaning process

heat the oven without any food

regularly:

• Turn the oven light on.

• Remove accessories from the oven.

• Select an oven function.

• Set the oven temperature to 250 °C and

let oven operate for 1 hour.

• Clean the oven cavity with a soft and

damp sponge.

Warning! Do not attempt to clean

catalytic surface with oven sprays,

abrasive cleaners, soap or other

cleaning agents. This will damage the

catalytic surface.

electrolux 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments