Electrolux EDE1074PDW User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
CLEANING THE DOOR
Clean periodically the interior part of the
door to remove any fluff. Accurate cleaning
ensures correct drying.
CLEANING THE DRUM
Caution! Do not use abrasives or steel
wool to clean the drum.
Lime in the water or cleaning agents
may form a barely visible lining on the
inside of the drum. The degree to
which the laundry has been dried is
then no longer detected reliably. The
laundry is damper than expected when
removed from the dryer.
Use a standard domestic cleaner (e.g.
vinegar-based cleaner) to wipe down
the inside of the drum and drum ribs.
CLEAN OPERATING SCREEN AND
HOUSING
Caution! Do not use furniture cleaners
or aggressive cleaning agents to clean
the machine.
Use a damp cloth to wipe down the
operating screen and housing.
WHAT TO DO IF ...
TROUBLESHOOTING BY YOURSELF
If, during operation, the error code E... plus
number or letter) appears on the LCD:
Switch the machine off and on again. Reset
programme. Press the START/PAUSE but-
ton If the error is still displayed, please in-
form your local Service Force Centre and
quote the error code.
Problem Possible cause Remedy
Dryer does not work.
Mains plug is not plugged in or
fuse is not working correctly.
Plug in at mains socket. Check
fuse in fuse box (domestic in-
stallation).
Loading door is open. Close loading door.
Have you pressed the START/
PAUSE button?
Press the START/PAUSE but-
ton again.
Drying results unsatisfactory.
Wrong programme selected.
Select a different programme
the next time you dry (see “Pro-
gramme chart” chapter).
Filter clogged. Clean filter.
Overloading of laundry.
Observe recommended loading
volumes.
Ventilation slots covered up. Uncover ventilation slots.
Residue on inside surface of
drum or drum ribs.
Clean inside surface of drum
and drum ribs.
Conductance of water at instal-
lation site differs from standard
setting of machine.
Re-programme standard set-
ting for degree of drying (see
‘Programming options’ chap-
ter).
Loading door does not close. Filter not in place. Install filter into place.
When a button is pressed, Err
appears on the LCD.
Washing protection. After the
start of the programme, the op-
tion can no longer be set.
Turn the programme knob to
"O" (OFF) . Set the programme
again.
Drum light does not work.
Programme selector in "O"
(OFF) position.
Turn programme selector to
any programme.
Defective light bulb.
Replace light bulb (see next
section).
12 electrolux
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comments to this Manuals

No comments