Electrolux E36GF76TPS Owner's Manual download pdf (Page 10)

10 Before Setting Surface Controls

Assembling the G5 burners

IMPORTANT! For proper ignition: Burner Ring Alignment

Tab Must Align with Burner Base Alignment Tab Slot.

NOTE: When the burner ring is properly seated, it will click into

place. When the burner cap is properly set in place it should not

move out of the recessed area of the burner head.

Installing Burner Grates

Do not use surface burners without burner caps and grates

properly installed. Missing pieces or improper installation may

lead to spills, burns, or damage to your range and cookware.

Make sure the burner grates are properly placed on the cooktop

before using the surface burners. The grates are designed to

rest inside the recess on the cooktop.To install burner grates,

place grates flat-side down and align into the cooktop recess.

Grates should rest flush against each other and against the

sides of the recess (See Figure 4).

Figure 3: Make sure burner cap and ring are secure before attempting to light the burner.

Ring

Alignment Tab

Burner

Cap

Burner

Ring

Burner

Base

Simmer

Head

Burner

Alignment

Tab

Slot

Burner

Figure 4: How to properly place burner grates

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 34 35

No comments

Electrolux E36GF76TPS Owner's Manual Page 10