Electrolux EKC6430AOW User Manual download pdf (Page 29)

A

Minimum distances

Dimension mm

A 685

13.3 Levelling of the appliance

Use small feet on the bottom of

appliance to set the appliance top

surface level with other surfaces.

13.4 Anti-tilt protection

CAUTION!

Install the anti-tilt protection

to prevent the appliance

from falling under incorrect

loads. The anti-tilt protection

only works when the

appliance is put in a correct

area.

Your appliance has the

symbols shown on the

pictures (if applicable) to

remind you about the

installation of the anti-tilt

protection.

CAUTION!

Make sure you install the

anti-tilt protection at the

correct height.

Make sure that the surface behind the

appliance is smooth.

1. Set the correct height and area for

the appliance before you attach the

anti-tilt protection.

2. Install the anti-tilt protection 176 mm

down from the top surface of the

appliance and 24 mm from the left

side of the appliance into the circular

hole on the bracket. See the

illustration. Screw it into the solid

material or use applicable

reinforcement (wall).

3. You can find the hole on the left side

at the back of the appliance. See the

illustration. Put the appliance in the

middle of the space between the

cupboards (1). If the space between

the bench cupboards is larger than

the width of the appliance, you must

adjust the side measurement to

centre the appliance.

ENGLISH 29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments