Electrolux EOB5450AOX User Manual download pdf (Page 23)

10. Hold the door glass panels by their

top edge and carefully pull them out

one by one. Start from the top panel.

Make sure the glass slides out of the

supports completely.

11. Clean the glass panels with water

and soap. Dry the glass panels

carefully.

When the cleaning is completed, install

the glass panels and the oven door. Do

the above steps in the opposite

sequence.

Make sure that you put the glass panels

(A and B) back in the correct sequence.

The first panel (A) has a decorative

frame. The screen-printing zone must

face the inner side of the door. Make

sure that after the installation the surface

of the glass panel frame (A) on the

screen-printing zones is not rough when

you touch it.

A B

Make sure that you install the middle

panel of glass in the seats correctly.

A

B

10.7 Replacing the lamp

Put a cloth on the bottom of the interior

of the appliance. It prevents damage to

the lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

CAUTION!

Always hold the halogen

lamp with a cloth to prevent

grease residue from burning

on the lamp.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300

°C heat-resistant lamp.

4. Install the glass cover.

11. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

ENGLISH 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments