Electrolux EON33000X User Manual download pdf (Page 41)

electrolux 41

Safety thermostat

In order to avoid excessive overheating due

to incorrect use of the appliance or else to a

faulty component, the oven is equipped with

a safety thermostat which cuts off the power

supply if necessary. Operation is restored

automatically when the oven temperature

decreases to normal values. Therefore, if the

thermostat cuts in because you have not

been using the appliance correctly, the oven

can be used again simply by waiting for the

appliance to cool down. If, instead, the

thermostat cuts in because of a faulty

component, you should call the Service

Department.

Hotplate control knobs

The control knobs for the hotplates (Fig. 4)

can be found on the oven control panel. The

energy regulator of the hotplates can be set

by means of a 7-position control knob:

0 = OFF

1 = Minimum

9 = Maximum

The intermediate positions give an

increasing heating power.

Double circuit cooking zone (Fig. 5)

If you wish to have the two electric circuits

work simultaneously, turn the knob to

maximum position 9 and then turn it

towards symbol “0”. You will hear a click.

Now the 2 circuits work together.

Then, you can regulate the power of the

cooking zone by turning the control knob

anticlockwise.

Carefully supervise cookings with

oil or fats, since these types of

food can result in a fire, when

over-heated.

Fig. 4

Fig. 5

The Cooling Fan

This oven is provided with a cooling fan,

meant to keep the front panel, the knobs

and the oven door handle cool. The fan

switches on automatically after a few

minutes of cooking. Warm air is blown out

through the aperture near the oven door

handle. When the oven is switched off, the

fan will remain on in order to to keep the

controls cool, after which it switches off

automatically.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 63 64

Comments to this Manuals

No comments