Electrolux EW27EW55PS Owner's Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
Setting Oven Controls 11
Setting the Clock-Time of Day
When the appliance is powered up for the first time or when the
electric supply to the appliance has been interrupted, the dis-
play will flash
12:00 (Figure 11). Before any function of the
oven can be set, CANCEL off must be pressed. This will set the
clock at 12:00. To set the clock for the actual time the user pref
key must first be pressed to bring the oven to the clock mode.
Be sure to set the correct time on the clock before using the
oven, especially if cooking with added time instructions.
.
To set the clock time (example: 1:30):
The clock cannot be adjusted while the oven is cooking, the
timer is active, or during a fresh clean cycle.
If an invalid time is entered, the control sounds an error tone, a
chime. Re-enter a valid time and press START enter. Pressing
CANCEL off automatically sets for 12:00.
Setting the Clock Display-On or Off
The clock display mode allows you to turn the clock display on
or off.
To set the clock display:
User preference options are not available while using any
cooking function, when using the kitchen timer, or during fresh
clean.
Setting 12 or 24 Hour Display Mode
The oven control is factory preset to display the time of day in
the 12-hour clock setting. The display can be changed to a 24
hour clock setting or to the OFF mode.
When the clock display is turned off, it continues to run and will
function based on the previously set 12 or 24-hour setting.
To change clock display modes:
You cannot change the clock display mode while the oven is
active with any cooking function or during fresh clean.
Figure 11: 12:00 initial display
1. Press user pref. CLO 1200 appears in
the display.
2. Enter
1 3 0 using the numeric keypad. 130
3. Press START enter to accept the new
time.
4. Press CANCEL off to exit the user pref-
erences menu.
1. Press user pref until preset clock dis-
play mode appears (Figure 12).
2. Use
+hi or -lo to toggle to the CLO
off option.
3. Press START enter to accept, then
CANCEL off to exit the preferences
mode.
Figure 12: Clock on (L) or off (R) display
1. Press user pref until the preset 12hr
clock display mode appears
(Figure 13).
1. Use
+hi or -lo to toggle to the 24hr
option (Figure 13).
2. Press START enter to accept, then
CANCEL off to exit the preferences
mode.
Figure 13: Clock 12 hour (L) or 24 hour (R) display
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Comments to this Manuals

No comments