Electrolux EW1200I User Manual download pdf (Page 34)

If the door has to be opened from left to right, invert the

position of the plates (7), the magnet (4) and the plate

(5) (Fig. B and E). Mount the countermagnet (6) and the

hinges (1) as previously described.

Important: the plastic screw (8) should never be

loosened (Fig. B and E).

Recommendations regarding the

construction and fitting of a base

when the installation requires an

integrated appliance to be raised

Where the appliance has been raised by mounting onto

a wooden base provided by the installer. The material

used to construct the base should have a non slip

surface, be water repellent and if possible be one solid

piece.

If it is not possible to use one solid piece, due to the

additional height required, ensure that any additional

strips of timber are glued and screwed to the underside

of the base (see Fig. F).

Drill four fixing holes see Fig. G

Position the base into the recess with its front edge as

far forward as the adjoining plinth line will allow. The

reason for placing the base in this position is to allow

a small strip of beading to be fitted in front of the

appliance feet.

P0983

600-605 mm

Front view

5 mm Hardwood strip

Additional pieces of

timber should run

from front to back

100 mm

40 mm

600-605 mm

50 mm

Front edge

Top view

95 mm

490 mm

1 2 ... 29 30 31 32 33 34 35 36

No comments

Electrolux EW1200I User Manual Page 34