Electrolux EWP10742 User Manual download pdf (Page 31)

ENGLISH 31

INSTALLATION11 .

Never place cardboard, wood or

similar materials under the machine

to compensate for any unevenness

in the floor.

Loosen or tighten the feet to adjust

the level. A correct adjustment of

the appliance level prevents the

vibration, noise and the movement

of the appliance when in operation.

Use a spirit level on the top and side

of the washing machine to check

the levels.

If you do not have a spirit level, as a

guide use the edge of a door frame,

cupboard or bench to check that

the washing machine is level.

When the washing machine is

levelled, try to rock it from corner

to corner. If it does rock, adjust the

legs again until it is levelled and

does not rock.

It is important that your

washing machine stands firm

and level on the floor to ensure

correct operation.

11.1 Positioning

That the appliance must not be

installed behind a lockable door, a

sliding door or a door with a hinge

on the opposite side to that of the

washing machine door is restricted.

Connect the water inlet hose to a

tap with 3/4” BSP thread.

Use the hose supplied with the

washing machine. DO NOT USE

OLD HOSES.

The other end of the inlet hose

which connects to the machine

can be turned in any direction.

Simply loosen the fitting, rotate

the hose and retighten the fitting,

making sure there are no water

leaks.

11.2 Water Inlet

Install the machine on a flat hard

floor. Make sure that air circulation

around the machine is not

impeded by carpets, rugs etc.

Check that the machine does not

touch the wall or cupboard units.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 99 100

Comments to this Manuals

No comments