Electrolux HFW41L8140 User Manual download pdf (Page 12)

7. OPTIONS

7.1 Temperature

Set this option to change the default

temperature.

Indicator = cold water.

The display shows the set temperature.

7.2 Spin

With this option you can decrease the

default spin speed.

The display shows the indicator of the

set speed.

Additional spin options:

No Spin

• Set this option to remove all spin

phases.

•

Set it for very delicate fabrics.

• The rinse phase uses more water for

some washing programmes.

• The display shows the indicator

.

Rinse Hold

• Set this option to prevent the laundry

creases.

• The washing programme stops with

the water in the drum. The drum turns

regularly to prevent the laundry

creases.

• The door stays locked. You must

drain the water to unlock the door.

• The display shows the indicator .

To drain the water refer to

‘At the end of the

programme’.

Extra Silent

• Set this option to remove all spin

phases and to perform a silent

washing.

•

The rinse phase uses more water for

some washing programmes.

• The washing programme stops with

the water in the drum. The drum turns

regularly to prevent the laundry

creases.

• The door stays locked. You must

drain the water to unlock the door.

• The display shows the indicator

.

To drain the water refer to

‘At the end of the

programme’.

7.3 Prewash

With this option you can add a prewash

phase to a washing programme.

Use this option for heavy soil.

When you set this option the programme

duration increases.

The related indicator comes on.

7.4 Delay Start

With this option you can delay the start of

a programme from 30 minutes to 20

hours.

The display shows the related indicator.

7.5 Extra Rinse

With this option you can add some rinses

to a washing programme.

Use this option for persons allergic to

detergents and in areas where the water

is soft.

The related indicator comes on.

7.6 Hot and cold

Two inlet hoses are supplied with the

appliance : one for the cold water and

one for the hot water:

• Turn the knob clockwise and set one

of the first 3 washing programmes,

the related indicator comes on.

The hot water connection is on.

The appliance fills with hot water from

your domestic hydraulic system.

The cold water is warmed up by the

heating element of the appliance.

To wash with cold water only:

•

Press

to deactivate the hot water

connection.

The related indicator goes off.

www.electrolux.com12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comments to this Manuals

No comments