Electrolux ELECTRONIC BASIC IH 18 User Manual download pdf (Page 13)

Electrical connection

The electrical connection should only ever be made after the water is

connected! The appliance is only suitable for a fixed connection of

380 V 3 ~ (three-phase current) .

The appliance must be connected to the protective conductor.

Important note: The wiring must be arranged so that the appliance can be

de-energised (disconnected from the electricity supply) before any intervention

involving the fuses being unscrewed, the automatic safety devices being

switched off, or similar measures being taken (isolating gap width of at least

3 mm).

Electrical connection terminal (3)

factory-prefitted.

Cut out cable inlet opening (1).

Slide flexible inlet bush (2) over

connection cable, insert it through the

back wall opening, and screw fixing

strap under connection terminal (4).

Mains connection on top

Mains connection lead

The connection cable must project from the wall

over an insulated length of at least 20 mm.

max.10

150

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Electrolux ELECTRONIC BASIC IH 18 User Manual Page 13