8
GB
fig.
2.95”
5.1”
15.67”
0.86”
Long
screws
1.5”
Wood
screws
8.3”
5.9”
15.98”-FHWC3055L
23.86”-FHWC3655L
Ceiling
Wall
Dimension
A
(see table)
Desired range hood distance above a
36” high cook top
Ceiling height
8 Feet 9 Feet 10 Feet *
1
A*
2
A*
2
A*
2
26”*
3
27-5/16”
27”*
3
28-5/16” 28-5/16”
28”*
3
29-5/16” 29-5/16” 29-5/16”
29”*
3
30-5/16”*
4
30-5/16” 30-5/16”
30”*
3
31-5/16”*
4
31-5/16” 31-5/16”
31”*
3
32-5/16”*
4
32-5/16” 32-5/16”
32”*
3
33-5/16”*
4
33-5/16” 33-5/16”
33” 34-5/16” 34-5/16”
34” 35-5/16” 35-5/16”
35” 36-5/16” 36-5/16”
*
1
: with 10’Extension chimney kit FHW10X55LS
(14) (not supplied). Please call Frigidaire at
1.800.944.9044 to order this kit.
*
2
: “Dimension A” in the chart represents the height
from cook top to where the bottom screw mounting
holes would be located.
*
3
: Recommended mounting height
*
4
: Recirculation Kit cannot be installed.
Step 2:
• Install the range hood (1) either with wood screws
or long screws, depending on the wall type:
Wall type Required screws
Wood 4 wood screws (11)
Brick/Concrete 4 long screws (8)
Electrical connections
Step 4:
• Loosenthe2shortscrewsfromthejunctionbox
(g.
)
.
• Connect the incoming positive, neutral and
ground cables to the respective terminals. The
ground cable is already pre-assembled onto the
junctionboxtoprovidegrounding(g. ).
• Insert2screws(8or11)inthetoplocation,but
donotfullyinsertthescrews(g.
). Mount the
range hood (1) to the wall and tighten the screws.
Insert and tighten the 2 remaining screws on the
bottomlocationoftherangehood(g.
/ ).
• Attachthecollar(5)totherangehood(1).Secure
with2shortscrews(8)(g.
).
0.08”
0.08”
fig.
fig.
fig.fig.
fig.
NOTE
Sometimes, sponge tape covers the holes. If the
holes are located behind the sponge tape, simply
insert the screw through the sponge tape.
Step 3:
• Mount upper and lower brackets (3, 4) on the
wall. Secure with the remaining 4 sets of long
screws (8). The notches of the lower bracket
shouldbefacinguptowardstheceiling(g.
)
.
• Attachtheexhaustduct.Intheexamplebelow
a round metal duct furnace pipe has been used.
The airtight connection of the exhaust duct
should then be improved with a duct tape. This
ensurestighttandthatnogreasevaporswill
escapefromtheduct(g.
)
.
fig.
fig.
Installing the hood
Installing the hood
00-Elux FHWC3055LSA-Range-Hood-Book-01.indb 8 12/8/10 12:46 PM
(28 pages)
(62 pages)
(52 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals