Electrolux 64570 Vi User Manual download pdf (Page 25)

25

Cleaning the spray arms

Regularly check the nozzles in the

three spray arms for blockages. If

necessary, clean the nozzles with a

piece of fine wire or a fine needle

and a strong water jet.

1 Do not damage the nozzle openings.

Top spray arm

1. Undo the fixing screw (A) by turning

anti-clockwise.

2. Pull the spray arm off the shaft.

3. Clean the spray arm and the fixing

screw.

4. Fasten the spray arm with the fixing

screw (A) turning clockwise.

Middle spray arm

1. Remove the middle spray arm by

turning it laterally.

The two-part spray arm bearing is

held together by a tension spring (B)

2. Clean spray arm nozzles.

3. To re-fit, press the middle spray arm

upwards until you feel it snap into

place.

Lower spray arm

1. Undo the fixing screw (C) by turning

anti-clockwise.

2. Pull the spray arm off the shaft.

3. Clean the spray arm and the fixing

screw.

4. Fasten the spray arm with the fixing

screw (C) turning clockwise.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Comments to this Manuals

No comments