Electrolux ESF2200DW User Manual

ESF 2200 DW... ...EN DISHWASHER USER MANUAL

• Let the dishes become cold beforeyou remove them from the appli-ance. Hot dishes can be easily dam-aged.• There can be water on the sides andon the

AB2. To remove the coarse filter (C), holdtightly the fine filter (B) and press thetwo sides of the coarse filter (C).3. Pull the coarse filter (C) ou

Problem Possible cause Possible solutionThe programme does not start. The mains plug is not connec-ted in the mains socket.Connect the mains plug. Th

Problem Possible cause Possible solution The quantity of detergent wasnot sufficient or missing.Make sure that the quantity ofdetergent is sufficient

INSTALLATIONWATER DRAIN CONNECTIONmax. 750 mm• Connect the water drain hose into a drainpipe with minimum diameter of 40 mm• Put the water drain hose

electrolux 15

www.electrolux.com/shop 117927173-A-252012

Electrolux. Thinking of you.Share more of our thinking at www.electrolux.comCONTENTSSafety instructions 2Product description 4Control panel 5Use

USE• This appliance is intended to be used inhousehold and similar applications suchas:– Staff kitchen areas in shops, officesand other working enviro

PRODUCT DESCRIPTION1 2 5 63784101191Salt container2Detergent dispenser3Rinse aid dispenser4Spray arm5Filters6Rating plate7Drain hose8Inlet hose connec

A) Water inlet hoseB) Plastic support for drain hoseC) Salt funnelD) Measuring container for rinse aidE) Measuring spoon for detergentCONTROL PANELDel

Caution! Only use salt fordishwashers. Other types of salt willcause damage to the appliance.Fill the salt container before you start aprogramme. Rema

CDE3. Close the detergent dispenser. Pressthe lid until the release button locks intoposition.4. If the programme has a prewash phase,put a small quan

G3. Remove the spilled rinse aid with an ab-sorbent cloth to prevent too much foamduring the programme.4. Put the cap on again and turn it clock-wise

Mix the spoons with other cutlery to preventthem to bond together.The cutlery basket has 2 cutlery grids thatyou can easily remove.Caution! Make sure