Electrolux ESF5533LOX User Manual download pdf (Page 11)

During the drying phase, the

door opens automatically

and remains ajar.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

opening. This can cause

damage to the appliance.

AirDry is automatically activated with all

programmes excluding (if

applicable).

To improve the drying performance refer

to the XtraDry option or activate AirDry.

CAUTION!

If children have access to

the appliance, it is advised to

deactivate AirDry as opening

the door may pose a danger.

How to deactivate AirDry

Make sure the appliance is in user mode.

1. Press Delay.

• The indicators and

are off.

• The indicator still flashes.

• The display shows the current

setting:

= AirDry activated.

2. Press Delay to change the setting:

= AirDry deactivated.

3. Press on/off to confirm the setting.

7. OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate

or deactivate options while a

programme is running.

Not all options are

compatible with each other.

If you select non compatible

options, the appliance

automatically deactivates

one or more of them. Only

the indicators of the still

active options are on.

If an option is not applicable

to a programme, the related

indicator is off or it flashes

quickly for a few seconds

and then goes out.

Activating options can affect

the water and energy

consumption as well as the

programme duration.

7.1 XtraDry

Activate this option to boost the drying

performance. With XtraDry on, the

duration of some programmes, water

consumption and the last rinse

temperature can be affected.

XtraDry is a permanent option for all

programmes other than and

need not to be selected at every cycle.

In the other programmes the setting of

XtraDry is permanent and it is

automatically used in next cycles. This

configuration can be changed at any

time.

ENGLISH 11

1 ... 10 11 12 ... 68

Comments to this Manuals

No comments