ESI6501LOXEN DISHWASHER USER MANUAL
How to set the water softenerlevelThe appliance must be in programmeselection mode.1. To enter the user mode, press andhold simultaneously Delay and S
– = Acoustic signal on.3. Press Delay to change the setting.4. Press the on/off button to confirm thesetting.8. BEFORE FIRST USE1. Make sure that the
MAX1234+-ABDCCAUTION!Only use rinse aid specificallydesigned for dishwashers.1. Press the release button (D) to openthe lid (C).2. Pour the rinse aid
• 5 minutes after the completion of theprogramme.• After 5 minutes if the programme hasnot started.Starting a programme1. Press the on/off button to a
10. HINTS AND TIPS10.1 GeneralThe following hints will ensure optimalcleaning and drying results in daily useand also help to protect the environment.
• Make sure that the spray arms canmove freely before you start aprogramme.10.5 Before starting aprogrammeMake sure that:• The filters are clean and c
5. Make sure that there are no residuesof food or soil in or around the edge ofthe sump.6. Put back in place the flat filter (A).Make sure that it is
Authorised Service Centre, check if youcan solve the problem by yourself with thehelp of the information in the table.With some problems, the displays
Problem Possible solutionThe dishes are wet. • The programme does not have a drying phase orhas a drying phase with low temperature.• The rinse aid di
ENGLISH19
CONTENTS1. SAFETY INFORMATION... 22. SAFETY INSTRUCTIONS...
www.electrolux.com/shop100006220-A-442014
responsible if an incorrect installation and use causesinjuries and damages. Always keep the instructions withthe appliance for future reference.1.1 C
• Before maintenance, deactivate the appliance anddisconnect the mains plug from the mains socket.• Do not use water spray and steam to clean theappli
from the mains socket. Contact theAuthorised Service Centre to replacethe water inlet hose.2.4 Use• Do not sit or stand on the open door.• Dishwasher
4. CONTROL PANEL12 34 56781On/off button2Program button3Programme indicators4Display5Delay button6Start button7Indicators8Option button4.1 IndicatorsI
Programme Degree of soilType of loadProgramme pha-sesOptions 2)• All• Crockery, cut-lery, pots andpans• Prewash• Wash from 45 °Cto 70 °C• Rinses• Dry•
5.2 Information for test institutesFor all the necessary information for testperformance, send an email to:info.test@dishwasher-production.comWrite do
7. SETTINGS7.1 Programme selection modeand user modeWhen the appliance is in programmeselection mode it is possible to set aprogramme and to enter the
Comments to this Manuals