Electrolux ESL7550RO User Manual

ESL7550ROEN Dishwasher User Manual

Water hardnessGerman de‐grees (°dH)French de‐grees (°fH)mmol/l Clarke de‐greesWater softenerlevel47 - 50 84 - 90 8.4 - 9.0 58 - 63 1043 - 46 76 - 83 7

• The indicator still flashes.• The display shows the currentsetting.– = the rinse aid emptynotification is deactivated.– = the rinse aid emptynoti

AirDry is automatically activated with allprogrammes excluding (ifapplicable).To improve the drying performance referto the XtraDry option or activa

automatically activated in next cycles.This configuration can be changed at anytime.Every time isactivated, XtraDry is off andneeds to be chosenmanu

4. Carefully shake the funnel by itshandle to get the last granules inside.5. Remove the salt around the openingof the salt container.6. Turn the cap

9.1 Using the detergentABCCAUTION!Only use detergentspecifically designed fordishwashers.1. Press the release button (A) to openthe lid (C).2. Put the

Make sure that there is detergent in thedetergent dispenser before you start anew programme.End of the programmeWhen the programme is complete, thedis

4. When the programme is completed,adjust the water softener accordingto the water hardness in your area.5. Adjust the released quantity of rinseaid.6

1. Turn the filter (B) counterclockwiseand remove it.2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).4. Wash the filters.5.

3. Wash the spray arm under runningwater. Use a thin pointed tool, e.g. atoothpick, to remove particles of soilfrom the holes.4. To install the spray

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...

12. TROUBLESHOOTINGWARNING!Improper repair of theappliance may pose adanger to the safety of theuser. Any repairs must beperformed by qualifiedpersonn

Problem and alarm code Possible cause and solutionThe programme lasts toolong.• If the delay start option is set, cancel the delay set‐ting or wait fo

Problem Possible cause and solutionPoor drying results. • Tableware has been left for too long inside theclosed appliance.• There is no rinse aid or t

Problem Possible cause and solutionLimescale deposits on thetableware, on the tub and onthe inside of the door.• The level of salt is low. Check the s

14. ENVIRONMENTAL CONCERNSRecycle materials with the symbol .Put the packaging in relevant containersto recycle it. Help protect theenvironment and h

ENGLISH 25

www.electrolux.com26

ENGLISH 27

www.electrolux.com/shop117881531-A-272018

1. SAFETY INFORMATIONBefore the installation and use of the appliance, carefullyread the supplied instructions. The manufacturer is notresponsible f

• The operating water pressure (minimum andmaximum) must be between 0.5 (0.05) / 8 (0.8) bar(MPa)• Obey the maximum number of 13 place settings.• If t

• Connect the mains plug to the mainssocket only at the end of theinstallation. Make sure that there isaccess to the mains plug after theinstallation.

3. PRODUCT DESCRIPTION54679 812 2311 10 11Top spray arm2Upper spray arm3Lower spray arm4Filters5Rating plate6Salt container7Air vent8Rinse aid dispen

4. CONTROL PANEL1234567891On/off button2Display3Delay button4Program button5MyFavourite button6TimeManager button7XtraDry button8Reset button9Indicato

Programme Degree of soilType of loadProgramme phases OptionsP44)• Heavy soil• Crockery, cut‐lery, pots andpans• Prewash• Wash 70 °C• Rinses• Dry• Time

Programme 1)Water(l)Energy(kWh)Duration(min)P6 10 0.9 301) The pressure and the temperature of the water, the variations of the mains supply, theoptio