Electrolux ESL8220RO User Manual

ESL 8220ROEN DISHWASHER USER MANUAL

End indicator off = the rinse aid dispenseris deactivated.4. Press the on/off button to confirm thesetting.6.5 Acoustic signalsAcoustic signals sound

recharge the resin in the water softener. Itseems that the appliance is not working.The washing phase starts only after thisprocedure is completed. Th

9.1 Using the detergentABCCAUTION!Only use detergentspecifically designed fordishwashers.1. Press the release button (A) to openthe lid (C).2. Put the

Cancelling the programmePress and hold simultaneously and until the appliance is inprogramme selection mode.Make sure that there is detergent in the

• Do not put in the appliance items madeof wood, horn, aluminium, pewter andcopper.• Do not put in the appliance items thatcan absorb water (sponges,

2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).4. Wash the filters.5. Make sure that there are no residuesof food or soil i

• If you regularly use short durationprogrammes, these can leave depositsof grease and limescale inside theappliance. To prevent this, werecommend to

12.1 The washing and drying results are not satisfactoryProblem Possible solutionThere are whitish streaks orbluish layers on glasses anddishes.• The

www.electrolux.com18

ENGLISH19

CONTENTS1. SAFETY INFORMATION... 22. SAFETY INSTRUCTIONS...

www.electrolux.com/shop117894350-A-382014

responsible if an incorrect installation and use causesinjuries and damages. Always keep the instructions withthe appliance for future reference.1.1 G

instruction concerning use of the appliance in a safeway and understand the hazards involved.• Do not let children play with the appliance.• Keep all

Authorised Service Centre to replacethe water inlet hose.2.4 Use• Do not sit or stand on the open door.• Dishwasher detergents are dangerous.Obey the

4. CONTROL PANEL12341On/off button2Programme buttons3Delay button4Indicators4.1 IndicatorsIndicator DescriptionEnd indicator.Multitab indicator.Salt i

Programme Degree of soilType of loadProgramme pha-sesOptions 5)• All • Prewash 1) With this programme you have the most efficient use of water and en

These settings will be saved until youchange them again.How to set the programmeselection modeThe appliance is in programme selectionmode when only th

• The end indicator starts to flash.The number of flashes indicatesthe level.– E.g. 5 flashes + pause + 5flashes = level 5.3. Press again and again