Electrolux GA552F101 User Manual download pdf (Page 31)

care and cleaning electrolux 31

External cleaning

Clean the external surfaces of the

machine and control panel with a

damp soft cloth. If necessary use only

neutral detergents. Never use

abrasive products, scouring pads or

solvent (acetone, trichloroethylene

etc....).

● Polished chromium steel

surfaces

Remove light dirt with a clean,

damp, soft cloth. Microfibre cloths

are particularly good.

When cleaning ensure that you do not

go against the direction of the

stainless steel finish (the fine

horizontal lines).

No circular movements!

● Aluminium look surfaces

Remove light dirt with a clean,

damp, soft cloth. Microfibre cloths

are particularly good.

● Agents that scratch or scour are

not suitable.

● If required, use a commercially

available cleaner for chrome

surfaces. Follow the

manufacturer’s instructions when

using these products.

Internal cleaning

Ensure that the seals around the

door, the detergent and rinse aid

dispensers are cleaned regularly with

a damp cloth.

We recommend every 3 months to

run the wash programme for heavy

soiled dishes using detergent but

without dishes.

Prolonged periods of non-

operation

If you are not using the machine for

any prolonged period of time you are

advised to:

1. Unplug the appliance and then

turn off the water.

2. Leave the door ajar to prevent the

formation of any unpleasant

smells.

3. Leave the inside of the machine

clean.

Frost precautions

Avoid placing the machine in a

location where the temperature is

below 0°C. If this is unavoidable,

empty the machine, close the

appliance door, disconnect the water

inlet pipe and empty it.

Moving the machine

If you have to move the machine

(moving house etc....):

1. Unplug it.

2. Turn the water tap off.

3. Remove the water inlet and

discharge hoses.

4. Pull the machine out together with

the hoses.

Avoid over tilting the machine during

transportation.

117987 91/0en 18-05-2007 8:33 Pagina 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Comments to this Manuals

No comments