Electrolux GA55LIBR User Manual download pdf (Page 12)

2. Press the on/off button to activate the

appliance.

Make sure that the appliance is in user

mode.

• If the salt indicator is on, fill the salt

container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme

for the type of load and the degree of

soil.

9.1 Using the detergent

20

30

A

B

C

CAUTION!

Only use detergent

specifically designed for

dishwashers.

1. Press the release button (B) to open

the lid (C).

2. Put the detergent, in powder or

tablets, in the compartment (A).

3. If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the

release button locks into position.

9.2 Setting and starting a

programme

The AUTO OFF function

This function decreases energy

consumption by deactivating automatically

the appliance when it is not operating.

The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate the

appliance. Make sure that the

appliance is in programme selection

mode.

3. Press again and again until the

indicator of the programme you want

to select comes on.

• If you want to select the

MyFavourite programme, press

MyFavourite.

The programme indicator of the selected

programme flashes.

The display shows the programme

duration.

4. Set the applicable options.

5. Close the appliance door to start the

programme.

• The programme indicator stops

flashing and comes on with fixed

light.

• The programme duration starts to

decrease with steps of 1 minute.

Starting a programme with delay

start

1. Set a programme.

2. Press Delay again and again until the

display shows the delay time you want

to set (from 1 to 24 hours).

The delay time flashes in the display.

3. Close the appliance door to start the

countdown.

The delay time stops flashing and comes

on with fixed light.

• When the countdown is completed, the

programme starts.

• While the countdown is running only

the buttons Reset and Delay are active.

It is not possible to change the

programme or options.

www.electrolux.com12

1 ... 11 12 13 ... 48

Comments to this Manuals

No comments