Electrolux EN3601MOX User Manual download pdf (Page 14)

Problem Possible cause Solution

The thickness of the frost

is greater than 4-5 mm.

Defrost the appliance.

The door has been

opened often.

Open the door only if neces-

sary.

There is no cold air circu-

lation in the appliance.

Make sure that there is cold

air circulation in the appli-

ance.

If the advice does not lead to

the desired result, call the

nearest brand-mark service.

8.2 Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective

door gaskets. Contact the After Sales

Service.

9. INSTALLATION

WARNING!

Refer to Safety chapters.

9.1 Positioning

This appliance can be installed in a dry,

well ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Climate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Some functional problems

might occur for some types

of models when operating

outside of that range. The

correct operation can only be

guaranteed within the

specified temperature range.

If you have any doubts

regarding where to install the

appliance, please turn to the

vendor, to our customer

service or to the nearest

Service Centre

9.2 Location

It must be possible to

disconnect the appliance

from the mains power supply;

the plug must therefore be

easily accessible after

installation.

The appliance should be installed well

away from sources of heat such as

radiators, boilers, direct sunlight etc.

Ensure that air can circulate freely around

the back of the cabinet. To ensure best

performance, if the appliance is positioned

below an overhanging wall unit, the

minimum distance between the top of the

www.electrolux.com14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments