Electrolux EK294SALWE B User Manual Page 46

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 45
46
Operating and control elements
The electronic control panel features the "touch capacitance
technology".
Any function can be activated by touching the corresponding icon.
Climate rating
The climate rating indicates the room
temperature at which the appliance may
be operated in order to achieve full refrig-
eration performance.
The climate rating is indicated on the
type plate.
The position of the type plate is shown in the section entitled
Description of the appliance.
Climate rating Room temperature
SN-ST +10°C to +38°C
SN-T +10°C to +43°C
Do not operate the appliance outside the
specified room temperature range.
Electrical connection
Only operate the appliance with alternating current (AC).
The permissible voltage and frequency are indicated on the type
plate. The position of the type plate is shown in the section entitled
Description of the appliance.
The socket must be properly earthed and protected by a fuse.
The tripping current of the fuse must be between 10 A and 16 A.
The socket must not be situated behind the appli-
ance and must be easily accessible.
Do not connect the appliance using an exten-
sion cable or extension socket.
Do not use stand-alone inverters (conversion
of direct current to alternating current/three-
phase current) or energy-saving plugs. Risk
of damage to the electronic control system!
Setting up
Standard EN 378 specifies that the room in which you install
your appliance must have a volume of 1 m
3
per 8 g of R 600a
refrigerant used in the appliance, so as to avoid the formation of
inflammable gas/air mixtures in the room where the appliance
is located in the event of a leak in the refrigerant circuit. The
quantity of refrigerant used in your appliance is indicated on the
type plate on the inside of the appliance.
Only use the appliance when it is installed.
Do not cover ventilation openings
or grille.
1 Temperature display (display)
2 Temperature setting buttons
3 On/O button
4 Action Cool button (the Action Cool button switches the refrig-
erator compartment to maximum cooling)
5Audible warning on/o button
6 Fan button
Symbols in the display
Setup mode is activated (activating the child lock)
Child lock is activated
ActionCool ON symbol
Fan ON symbol
Demo mode is activated
Switching the appliance on and o
Switching the appliance on
Press the On/Off button until the temperature display
lights up.
Switching the appliance o
Keep the On/Off button pressed for approx. 3 seconds so that
the temperature display goes out.
Page view 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 59 60

Comments to this Manuals

No comments