Electrolux EKEEVSWE User Manual download pdf (Page 46)

Setting up

• StandardEN378specifiesthattheroominwhichyouinstall

your appliance must have a volume of 1 m

per 8 g of R 600a

refrigerant used in the appliance, so as to avoid the formation of

inflammablegas/airmixturesintheroomwheretheappliance

is located in the event of a leak in the refrigerant circuit. The

quantity of refrigerant used in your appli-

ance is indicated on the type plate on the

inside of the appliance.

•Onlyusetheappliancewhenitisinstalled.

•

Do not cover ventilation openings

or grille.

Switching the appliance on and o

Switching the appliance on

Press the On/Off button until the temperature display

lights up.

Switching the appliance o

Keep the On/Offbuttonpressedforapprox.3secondssothat

the temperature display goes out.

1 Temperature display (display)

2 Temperature setting buttons

3 On/Obutton

4 Action Cool button (The Action Cool button switches the re-

frigeratorcompartmenttomaximumcooling)

5Audiblewarningon/obutton

Symbols in the display

Setup mode is activated (activating the child lock)

Child lock is activated

Symbol ActionCool on

Demo mode is activated

Operating and control elements

The electronic control panel has the "touch capacitance tech-

nology".

Any function can be activated by touching the corresponding icon.

Climate rating

The climate rating indicates the room

temperature at which the appliance may

be operated in order to achieve full refrig-

eration performance.

The climate rating is indicated on the

type plate.

The position of the type plate is shown in the section entitled

Description of the appliance.

Climate rating Room temperature

SN-ST +10°Cto+38°C

SN-T +10°Cto+43°C

Do not operate the appliance outside the

specified room temperature range.

Electrical connection

Only operate the appliance with alternating current (AC).

The permissible voltage and frequency are indicated on the type

plate. The position of the type plate is shown in the section entitled

Description of the appliance.

The socket must be properly earthed and protected by a fuse.

The tripping current of the fuse must be between 10 A and 16 A.

The socket must not be situated behind the appli-

ance and must be easily accessible.

Donotconnecttheapplianceusinganexten-

sioncableorextensionsocket.

Do not use stand-alone inverters (conversion

of direct current to alternating current/three-

phase current) or energy-saving plugs. Risk

of damage to the electronic control system!

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 59 60

Comments to this Manuals

No comments

Electrolux EKEEVSWE User Manual Page 46

Comments to this Manuals

Related products and manuals for Fridges Electrolux EKEEVSWE