Electrolux ER9530I User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 10
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
7
Superchill compartment
¥ The temperature in this compartment (from 0¡C
to +3¡C) is kept constant by a special sensor. No
adjustment is needed.
¥ Products stored in this compartment will keep
fresh and in peak condition. It is advisable to
wrap foods in aluminium foil or plastic film.
¥ Drinks can be cooled quickly in this compartment
without any danger of freezing
¥ Make sure that the drawers are fully closed
before shutting the door.
Freezer compartment
¥ If food is to be frozen immediately after having
installed the appliance or after a prolonged period
out of use, turn temperature control knob F to
position ÇSÈ and allow the appliance to run for at
least 4 hours before placing the food in it.
If the freezer is already operating, with food
inside it, turn knob F to position ÇSÈ 24 hours
before loading food to be frozen.
Freezing will take 24 hours, after which knob F
should be turned to the mid position.
¥ The alarm light indicates when the temperature
inside the freezer compartment has risen to a
point at which safe storage of frozen foods can
no longer be guaranteed. When the appliance is
first started up, or after having loaded a quantity
of food to be frozen, this warning light will stay or
until a safe storage temperature has been
reached.
¥ Products to be frozen should be placed in the fast
freeze compartment and, once frozen, moved to
the storage baskets.
¥ The maximum freezing capacity is 12 kg in 24
hours. Do not freeze more than one quantity at a
time.
¥ The electronic thermostat consists of 6 pilot
lights. Each light corresponds to a temperature
inside the freezer. Frequent or prolonged opening
of the doors may slightly modify the temperature
indicated. Temperature variations can also occur
if excessive quantities of food are loaded into the
freezer (see freezing capacity).
14
Fitting the door panels
¥ Drill the door panels as shown in the diagram and
fit the guide blocks.
¥ Carefully level the appliance before fitting the
door panels.
¥ Open one of the two bottom doors and its hinge
and insert the door panel through guide block A in
the guide on the appliance door.
¥ Secure the panel with a screw in the vertical slot
in the hinge.
¥ Fit bottom guide block C using two screws and fix
the hinge with a screw in the vertical slot.
¥ Close the door and check that the panel is
positioned at the required height.
¥ Repeat this operation for the other bottom door.
¥ Open the bottom door and position shim E on the
panel. Open the top door and its hinge.
¥ Insert the top door panel through guide block F in
the guide, resting the door panel on shim E.
¥ Fix the door panel to the top hinge with a screw in
the vertical slot.
TOP
RIGHT-HAND
FRONT PANEL
360,5
97
77
3 MIN
444 MIN.
447 MAX.
11
1052
577
1034
561
20
5
20
11
TOP
LEFT-HAND
FRONT PANEL
BOTTOM
RIGHT-HAND
FRONT PANEL
BOTTOM
LEFT-HAND
FRONT PANEL
A
A
C
E
F
E
Page view 6
1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments