Electrolux ERA37320X User Manual download pdf (Page 11)

wall unit, the minimum distance between

the top of the cabinet and the wall unit

must be at least 40 mm . Ideally, however,

the appliance should not be positioned be-

low overhanging wall units.

The ventilation space can be:

• directly above the appliance

• behind and above the top cupboard.

In this case, the space behind the top

cupboard must be at least 50 mm deep.

50mm

Electrical connection

Before plugging in, ensure that the voltage

and frequency shown on the rating plate

correspond to your domestic power supply.

The appliance must be earthed. The power

supply cable plug is provided with a contact

for this purpose. If the domestic power sup-

ply socket is not earthed, connect the appli-

ance to a separate earth in compliance with

current regulations, consulting a qualified

electrician.

The manufacturer declines all responsibility

if the above safety precautions are not ob-

served.

This appliance complies with the E.E.C. Di-

rectives.

Removing the transport support

Your appliance is equipped with transport

support to secure the door during transpor-

tation.

To remove them do these steps:

1. Open the door.

2. Remove the transport support from the

door sides.

3. Remove the transport support from the

lower hinge (some models).

Important! Some models are fitted with a

silencing pad under the cabinet. Do not

remove this pad.

3

2

Removing the shelf holders

Your appliance is equipped with shelf re-

tainers that make it possible to secure the

shelves during transportation.

To remove them proceed as follows:

1. Move the shelf holders in the direction of

the arrow (A).

2. Lift up the shelves in the rear edge (B)

and push it forward until it is freed (C).

3. Remove the retainers.

A

B

C

Rear spacers

Install the spacers provided within the ac-

cessory bag as shown in the figure.

electrolux 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments