Electrolux ERZ28801 User Manual download pdf (Page 4)

• The appliance must not be located close

to radiators or cookers.

• Make sure that the mains plug is accessi-

ble after the installation of the appliance.

•

Connect to potable water supply only.

4)

Service

• Any electrical work required to do the

servicing of the appliance should be car-

ried out by a qualified electrician or com-

petent person.

• This product must be serviced by an au-

thorized Service Centre, and only genu-

ine spare parts must be used.

Environment Protection

This appliance does not contain gasses

which could damage the ozone layer,

in either its refrigerant circuit or insula-

tion materials. The appliance shall not

be discarded together with the urban

refuse and rubbish. The insulation foam

contains flammable gases: the appli-

ance shall be disposed according to

the applicable regulations to obtain

from your local authorities. Avoid dam-

aging the cooling unit, especially at the

rear near the heat exchanger. The ma-

terials used on this appliance marked

by the symbol

are recyclable.

CONTROL PANEL

Fridge Control panel

ON/OFF

ACTION

FREEZE

ACTION

COOL

1 2 3 4 5 6 7

1. Pilot light

2. ON/OFF switch

3. Temperature regulator (warmest)

4. Temperature indicator

5. Temperature regulator (coldest)

6. Action Cool light

7. Action Cool switch

Switching on

Insert the plug into the wall socket.

Press the ON/OFF switch .

The Pilot Light will light up.

Switching off

The fridge is shut off by pressing the ON/

OFF switch until the Pilot light and the Tem-

perature indicator switched off.

Temperature regulation

The temperature can be adjusted between

+3°C and +8°C.

By pressing the Temperature regulators,

the current temperature setting flashes on

the Temperature indicator. It is possible to

modify the setting temperature only with

flashing indicator. To set a warmer temper-

ature, press warmest Temperature regula-

tor. To set a colder temperature, press

coldest Temperature regulator. The Tem-

perature indicator displays the newly selec-

ted temperature.

The newly selected-temperature will be

reached within 24 hours.

Temperature indicator

During normal functioning the Temperature

indicator shows the latest set temperature.

Action Cool function

The maximum performance is obtained by

setting the Action Coolfunction. It’s recom-

mended when loading large quantities of

food.

You can activate the Action Cool function

by pressing the Action Cool switch.

The Action Cool light will light up.

After about 6 hours the Action Cool func-

tion switches off automatically.

4) If a water connection is foreseen.

4 electrolux

1 2 3 4 5 6 7 8 9 ... 47 48

Comments to this Manuals

No comments