Electrolux U24292 EOS 5330L User Manual download pdf (Page 29)

BEFORE CLEANING THE APPLIANCE

ALWAYS ALLOW THE COOLING FAN TO

COOL THE APPLIANCE DOWN BEFORE

SWITCHING OFF THE ELECTRICITY

SUPPLY.

CLEANING MATERIALS

Before using any cleaning materials on your

appliance, check that they are suitable and that their

use is recommended by the manufacturer.

Cleaners that contain bleach should NOT be used as

they may dull the surface finishes. Harsh abrasives

should also be avoided.

CLEANING THE OUTSIDE OF THE

APPLIANCE

DO NOT use abrasive cleaning materials e.g. Hob

Brite, Brillo pads or scourers on painted or printed

finishes as damage may occur. Regularly wipe over

the control panel and oven door using a soft cloth

and hot water to which a little washing up liquid has

been added. Any spillage on the stainless steel

finish must be wiped off immediately.

Stainless Steel cream cleaners are abrasive and

should be avoided as they may dull the surface

finish.

DO NOT ATTEMPT TO REMOVE ANY OF THE

CONTROL KNOBS FROM THE APPLIANCE AS

THIS MAY CAUSE DAMAGE AND IS A SAFETY

HAZARD.

Under no circumstances should the door

assembly be detached from the product for

cleaning. Please refer to the cleaning

instructions.

CLEANING INSIDE THE OVEN/GRILL

The Stayclean surface inside the Oven should not be

cleaned manually. See page 30 'Care of Stayclean

Surfaces'.

The vitreous enamel oven base can be cleaned using

normal oven cleaners or aerosol oven cleaners with

care. Ensure that the manufacturers instructions are

followed and that all parts are well rinsed afterwards.

Aerosol cleaners must not be used on Stayclean

surfaces and must not come into contact with

elements or the door seal as this may cause

damage.

REMOVING AND REPLACING WIREWORK

SIDE RUNNERS

Remove all shelves and furniture from the oven.

Always ensure the telescopic runners are pushed

back into place in the oven cavity. Hold the bottom of

the wirework runners and draw the runners towards

the centre of the oven. Unhook from the top and

remove.

The wirework telescopic runners should not be

placed in a dishwasher. Dry carefully after washing

in hot water to which washing up liquid has been

added. If heavily soiled mild abrasives may be used.

To replace the runners, hook the wirework side

runner into the cavity, slide back and press into

place. Ensure the wirework runners are firmly in

position before replacing the oven shelves.

BRACKET

CAVITY CENTRE

CARE AND CLEANING

1 ... 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Electrolux U24292 EOS 5330L User Manual Page 29

Comments to this Manuals