Electrolux U24292 EOS 5330L User Manual download pdf (Page 8)

ii. By connecting the cooker point to the hob and

then connecting the hob to the oven. Provided

that the hob manufacturer permits it, connect

the oven to the hob to the cooker point using

the same cabling as described in (a) above.

Check the hob terminal block is large enough

to take two cables and is of suitable rating. If

not b) i) on page 7 must be used. See Fig.2.

NOTE: 13 amp cable is not suitable for connecting

this application.

NOTE: It is good practice to:

· Fit an Earth Leakage Circuit Breaker to your

house wiring

· Wire your appliance to the latest IEE regulations.

PREPARING CABINET FOR FITTING OF OVEN

· Make sure the cabinet is the correct size for the

appliance to be fitted (Ref. Fig. 3 and 4).

· If the size is between 565-570mm, then the

cabinet should be modified so that at the screw

fixing points the recommended dimension of at

least 560-565mm is maintained. The

modification should ideally be localised to ensure

that after screw fitment the oven is securely

fixed into position.

· The cabinet must be stable and level by firmly

securing it to the wall or floor. If necessary,

make arrangements to ensure the shelf upon

which the oven will rest is level.

Fig. 2

1 2 3 4 5 6 7 8 9 ... 36

No comments

Electrolux U24292 EOS 5330L User Manual Page 8