Electrolux EHF3320NOK User Manual download pdf (Page 25)

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting The hob deacti‐

vates after

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

4.3 The heat setting

Touch to increase the heat setting.

Touch to decrease the heat setting.

Touch

and at the same time to

deactivate the cooking zone.

4.4 Activating and deactivating

the outer rings

You can adjust the surface you cook to

the dimension of the cookware.

Use sensor field:

To activate the outer ring: touch the

sensor field. The indicator comes on.

To deactivate the outer ring: touch the

sensor field until the indicator goes out.

4.5 Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function or change the

time: touch

or of the timer to set

the time (00 - 99 minutes). When the

indicator of the cooking zone starts to

flash slowly the time counts down.

To see the remaining time: set the

cooking zone with . The indicator of

the cooking zone starts to flash quickly.

The display shows the remaining time.

To deactivate the function: set the

cooking zone with and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

When the time comes to an

end, the sound operates and

00 flashes. The cooking

zone deactivates.

To stop the sound: touch .

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and

the cooking zones do not operate. The

heat setting display shows

.

To activate the function: touch .

Touch or of the timer to set the

time. When the time comes to an end,

the sound operates and 00 flashes.

To stop the sound: touch

.

The function has no effect

on the operation of the

cooking zones.

4.6 STOP+GO

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, you cannot

change the heat setting.

The function does not stop the timer

functions.

To activate the function: touch

.

comes on.

To deactivate the function: touch .

The previous heat setting comes on.

4.7 Lock

You can lock the control panel while

cooking zones operate. It prevents an

accidental change of the heat setting.

Set the heat setting first.

ENGLISH 25

1 ... 24 25 26 ... 68

Comments to this Manuals

No comments