Electrolux EHF3320NOK User Manual download pdf (Page 23)

• You spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• You do not deactivate a cooking zone

or change the heat setting. After some

time comes on and the hob

deactivates. See below.

The relation between heat setting and

times of the function:

• , 1 - 2— 6 hours

• 3 - 4 — 5 hours

• 5 — 4 hours

• 6 - 9 — 1.5 hours

4.3 The heat setting

Touch to increase the heat setting.

Touch to decrease the heat setting.

Touch and at the same time to

deactivate the cooking zone.

4.4 Activating and deactivating

the outer rings

You can adjust the surface you cook to

the dimension of the cookware.

Use sensor field:

To activate the outer ring: touch the

sensor field. The indicator comes on.

To deactivate the outer ring: touch the

sensor field until the indicator goes out.

4.5 Timer

Count Down Timer

You can use this function to set how long

the cooking zone operates for only this

one time.

First set the cooking zone then set the

function. You can set the heat setting

before or after you set the function.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function or change the

time: touch

or of the timer to set

the time (00 - 99 minutes). When the

indicator of the cooking zone starts to

flash slowly the time counts down.

To see the remaining time: set the

cooking zone with . The indicator of the

cooking zone starts to flash quickly. The

display shows the remaining time.

To deactivate the function: set the

cooking zone with

and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

When the time comes to an

end, the sound operates and

00 flashes. The cooking zone

deactivates.

To stop the sound: touch .

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and the

cooking zones do not operate (the heat

setting display shows

).

To activate the function: touch .

Touch or of the timer to set the

time. When the time comes to an end, the

sound operates and 00 flashes.

To stop the sound: touch .

The function has no effect on

the operation of the cooking

zones.

4.6 STOP+GO

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, you cannot

change the heat setting.

The function does not stop the timer

functions.

To activate the function: touch

.

comes on.

To deactivate the function: touch

.

The previous heat setting comes on.

ENGLISH

23

1 ... 22 23 24 ... 64

Comments to this Manuals

No comments