Electrolux EOB7S31Z User Manual download pdf (Page 14)

7.2 Setting and changing the

time

After the first connection to the mains,

wait until the display shows

and 12:00.

"12" flashes.

1. Press or to set the hours.

2. Press

.

3. Press or to set the minutes.

4. Press .

The display shows the new time.

To change the time of day press

again and again until starts to flash.

7.3 Setting the DURATION

1. Set a heating function and

temperature.

2. Press again and again until

starts to flash.

3. Press or to set the minutes

for DURATION.

4. Press or the DURATION starts

automatically after 5 seconds.

5. Press

or to set the hours for

DURATION.

6. Press or the DURATION starts

automatically after 5 seconds.

When the set time ends, the signal

sounds for 2 minutes. The display shows

flashing and time setting. The oven

turns off.

7. Press a sensor field to stop the

signal.

8. Turn off the oven.

7.4 Setting the END

1. Set a heating function and

temperature.

2. Press again and again until

starts to flash.

3. Press or to set the END and

press . First you set the minutes

and then the hours.

When the set time ends, the signal

sounds for 2 minutes. The display shows

flashing

and the time setting . The

oven turns off automatically.

4. Press a sensor field to stop the

signal.

5. Turn off the oven.

7.5 Setting the TIME DELAY

function

1. Set a heating function and

temperature.

2. Press again and again until

starts to flash.

3. Press

or to set the minutes

for DURATION.

4. Press .

5. Press or to set the hours for

DURATION.

6. Press .

The display shows flashing .

7. Press

or to set the END time

and press . First you set the

minutes and then the hours.

The oven turns on automatically later on,

works for the set DURATION time and

stops at the set END time. When the set

time ends, the signal sounds for 2

minutes. The display shows flashing

and the time setting . The oven turns off

automatically.

8. Press a sensor field to stop the

signal.

9. Turn off the oven.

When the Time delay

function is turned on, the

display shows a symbol of

the heating function,

with a dot and . The dot

shows which clock function

is on in the Clock / residual

heat display.

7.6 Setting: Minute Minder

1. Press .

The display shows flashing and "00".

2. Press

to switch between options.

First you set the seconds, then the

minutes and the hours.

3. Press or to set the MINUTE

MINDER and to confirm.

www.electrolux.com14

1 ... 13 14 15 ... 48

Comments to this Manuals

No comments