Electrolux EOC5741AOX User Manual download pdf (Page 27)

Option Description

Quick pyroly-

sis

for a low level

of dirt (1 h)

Normal pyrol-

ysis

for a medium

level of dirt (1

h 30 min)

Intense pyrol-

ysis

for a high lev-

el of dirt (2 h

30 min)

When the pyrolytic cycle

starts, the lamp does not

work and the cooling fan

works at a higher speed.

Do not open the door during

the heating up time. If you

open the door, you will cancel

the pyrolytic cleaning cycle.

3. To stop the pyrolytic cleaning cycle,

touch .

Do not use the appliance until the door

lock symbol is off.

11.4 Removing and installing the

door

You can remove the door and the internal

glass panels to clean it. The number of

glass panels is different for different

models.

WARNING!

Be careful when you remove

the door from the appliance.

The door is heavy.

1. Open the door fully.

2. Fully lift up the clamping levers (A) on

the two door hinges.

A

A

3. Close the door until it is at an angle of

approximately 45°.

45°

4.

Hold the door with one hand on each

side and pull it away from the

appliance at an upwards angle.

5. Put the door with the outer side down

on a soft cloth on a stable surface.

This is to prevent scratches.

6. Hold the door trim (B) on the top edge

of the door at the two sides and push

inwards to release the clip seal.

1

2

B

CAUTION!

Rough handling of the glass,

especially around the edges

of the front panel, can cause

the glass to break.

7. Pull the door trim to the front to

remove it.

8. Hold the door glass panels on their

top edge one by one and pull them up

out of the guide.

9. Clean the glass panel with water and

soap. Dry the glass panel carefully.

ENGLISH

27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Comments to this Manuals

No comments