4. Lift and turn the lever fully on the left
hinge.
5. Close the oven door halfway to the
first opening position. Then lift and
pull forward and remove the door
from its seat.
6. Put the door on a soft cloth on a
stable surface.
7. Hold the door trim (B) on the top
edge of the door at the two sides and
push inwards to release the clip seal.
8. Pull the door trim to the front to
remove it.
9. Hold the door glass panels by their
top edge and carefully pull them out
one by one. Start from the top panel.
Make sure the glass slides out of the
supports completely.
10. Clean the glass panels with water
and soap. Dry the glass panels
carefully. Do not clean the glass
panels in the dishwasher.
When the cleaning is completed, install
the glass panels and the oven door.
Make sure that you put the glass panels
(A and B) back in the correct sequence.
Check for the symbol / printing on the
side of the glass panel, each of the glass
panels looks different to make the
disassembly and assembly easier.
When installed correctly the door trim
clicks.
www.electrolux.com28
Comments to this Manuals